See what our Experts say about this B and W Accessories and Parts

• B&W Turnover Gooseneck for 2015 Ford F-350 Cab and Chassis
  Hello Arash. Thank you for all the information, it is most helpful. The VIN confirmed that it is a 2015 Ford F-350 Cab and Chassis. For your 2015 Ford F-350 Cab and Chassis there is not a bolt on application. Your best bet would be to get the Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs # BWGNRC800, this would need to be fabricated to work. If you had a flatbed on the chassis you could use B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks...
  view full answer...
• Recommended Trailer Hitch, Gooseneck Hitch, and Sway Control for 2007 Ram 3500 Flatbed Chassis
  For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41936 rated for 1,200 lbs tongue weight or 12,000 lbs towing. If you need a stronger receiver or one that can use weight distribution, I recommend the Draw Tite Class V # 41947 rated for 15,000 lbs towing without weight distribution or 16,000 lbs towing with...
  view full answer...
  
• What B&W Turnoverball Will Fit On A 2007 Dodge Ram 2500?
  Hello Wynn, thanks for reaching out. The GNRC800 center section fits quite a few different vehicles, but this would not be the correct part for a 2007 Ram 2500. This truck uses a different center section, the GNRC900. So if you need to put the B&W Turnoverball hitch in your ram, you will need a whole new hitch. What you will need is the following: - B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1313
  view full answer...
• Recommended B&W Gooseneck Hitch for a 2006 Ford F-350
  Sorry Jerry we do not sell the installation hardware separately. It comes with the B&W Turnoverball Gooseneck Custom Installation Kit item # BWGNRM1108 you referenced. You'll want to contact B&W directly about getting all the nuts and bolts you'll need to install the item # BWGNRM1108 and item # BWGNRC800. These parts make up the B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1108 that is confirmed to fit your 2006 Ford F-350. I have linked the installation instructions...
  view full answer...
• B&W Turnover Ball Installation Kit For a 1994 Ford F-250
  Your 1994 Ford F-250 2WD 8' bed with the 7.3 diesel will need one of two installation kits depending on if it has overload springs. The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1110 is for your truck if it has the factory overload springs. This kit will use the Installation Kit # BWGNRM1110 and Center Section # BWGNRC800. The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1100 is for your truck if it does not have the factory overload springs. This kit will...
  view full answer...
• Replacement Parts For B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108
  We only offer the Installation Kit # BWGNRM1108 which contains the mounting hardware and brackets for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108. I have linked the installation instructions for the hitch below which does list the hardware needed if you would rather get it from a local hardware store. We do also have the Replacement Safety Chain U-Bolt Kit # BW1900-2-1600 which comes as a part with the Center Section # BWGNRC800.
  view full answer...
• Replacement Center Section for B&W Turnoverball Gooseneck Hitch BWGNRK1111
  For just the center section of the B and W Turnoverball part # BWGNRK1111 you'd want the part # BWGNRC800. We checked with B and W to confirm that this is the correct part number.
  view full answer...
• B&W Gooseneck Hitch For a 2017 Ford F-350 Cab and Chassis
  We definitely have Gooseneck options for a 2017 Ford F-350 Cab and Chassis. That being said, I spoke to B&W and they currently do not have a custom fit model available. They did, however, say the # BWGNRC800 would work, but custom rails would need to be fabricated to attach to the frame. If you will be installing a flatbed on to the chassis at some point, you could also use # BWGNRK1500. This will need to be welded on as well. Though we do not have any install videos for you style set...
  view full answer...
• Goose Neck Hitch Frame Width Needed For A Ford F-550 Cab And Chassis
  I contacted B&W direct here and they do not have a direct bolt up kit for the 2017 Ford F-550 Cab and Chassis truck as they have a much narrower frame of 34" and they normally recommend that you use one of the center sections like the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRC800 and fabricate the mounting system to the frame of the Cab and Chassis. Included is a video overview of this solution for your reference.
  view full answer...
• Are the Frame Brackets for the B&W Turnoverball Gooseneck Hitch GNRK1111 Sold Separately
  Yes, if you already have the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRC800 you can purchase just the B&W Turnoverball Gooseneck Custom Installation Kit for Ford part # BWGNRM1111 which would then give you the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1111.
  view full answer...
• What are the Dimensions of the Center Section for the B&W Turnoverball Hitch
  Hey Waydin, the Center Section for B&W Turnoverball Underbed Gooseneck Hitch # BWGNRC800 measures 7 1/2" wide, 29 1/2" long, and 4 1/2" high.
  view full answer...
• B & W Turnover Ball Gooseneck Hitch Options for 2000 Ford F350 Cab and Chassis Truck
  B & W doesn't offer a bolt-on application for a cab and chassis truck but they do offer options that could work for you. If your 2000 Ford F350 has the steel flat bed, B&W recommends the # BWGNRK1500. This is a weld-on application. Or, another option would be the # BWGNRC800, but you'd need to have your own fabrication work done in order to install the hitch.
  view full answer...
• Estimated Professional Installation Time for B&W Gooseneck Trailer Hitch on 1998 Dodge Ram 2500
  First, B and W gooseneck hitch # BWGNRC800 is just the hitch. You will also need an installation kit that fits your 1998 Dodge Ram 2500. For the installation kit and the hitch together use # BWGNRK1394. When we install gooseneck trailer hitches here we take the whole day because we also film the installation. A professional with experience who was not being filmed would probably take 3 to 6 hours. I have included a link to the instructions for you. What you can do is run it by an installer...
  view full answer...
• B&W Turnoverball Gooseneck Installation Kit For A 1996 Ford F-350 With Overload Springs
  The B&W Turnoverball Gooseneck Custom Installation Kit for Ford # BWGNRM1110 is the correct kit needed for your 1996 Ford F-350 with overload springs. This rail kit will let you install your B&W Turnoverball gooseneck trailer hitch # BWGNRC800. The rails have a sturdy steel construction and has a powder coated finish that resists corrosion. I attached an installation video link below.
  view full answer...
• Recommended Turnoverball Gooseneck Hitch for a 2006 Ford F-250
  I am sorry but no. The B&W Turnoverball Gooseneck Custom Installation Kit item # BWGNRM1104 you referenced fits the F-150's from that generation of Ford trucks not the F-250's. The B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1108 is the full system for the 2006 F-250's. This uses the Turnoverball Gooseneck Custom Installation Kit item # BWGNRM1108 and the item # BWGNRC800 center section. I have linked an installation video below to help you get your gooseneck hitch...
  view full answer...
• Recommended Gooseneck Hitch for 2006 Ford F-350 Cab and Chassis
  The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1108 only fits certain years of the F-250 and F-350 Super Duty. According to B&W this will not work with your 2006 F-350 Cab and Chassis frame. The metal plate you are talking about for the installation of the # BWGNRK1500 is the bed itself. You have to have a 1/8" floor plate if you have a steel flatbed. If you do not have a steel flatbed that meets this requirement, your only option would be to use...
  view full answer...
• Replacement Install Kit for B&W Gooseneck Hitch on 1999 Ford F-250 or F-350 Super Duty
  We do have just the install kit for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1108 which fits your 1999 Ford F-250 or F-350 Super Duty. What you need is the B&W Turnoverball Gooseneck Custom Installation Kit for Ford # BWGNRM1108 which includes the hardware and will work with the center section you already have, which is part # BWGNRC800. I have added a link to a video review of the installation kit for you to check out as well.
  view full answer...
• Moving B&W Turnoverball Gooseneck Hitch From 2014 Ford F-250 to 2010 Ford F-250
  The frame rails for the 2014 and 2010 Ford F-250 are different enough that the same bracket kit can't be used for the B&W Turnoverball Gooseneck Hitch on both trucks. What you can do though is keep your existing center hitch section (part # BWGNRC800) and just obtain the needed mounting bracket kit for the 2010 F-250 with part # BWGNRM1108. This kit includes all the needed hardware and frame brackets to install the hitch to the truck. I have attached the written installation instructions...
  view full answer...
• Comparing B&W Gooseneck Hitches for Differences and Compatibility with 2018 Ram 3500
  The difference between the B&W Turnoverball Underbed Gooseneck Trailer Hitch - 30,000 lbs # BWGNRC912 and # BWGNRC800 is the mounting holes and rails they are compatible with. You can see the # BWGNRC800 has 3 holes per side for mounting and the # BWGNRC912 has 4 elongated holes per side for mounting. Each of these systems has custom mounted rails to fit specific vehicles. If you are looking for your 2018 Ram 3500, the B&W Turnoverball # BWGNRK1314 is the correct fit for either a 6-1/2...
  view full answer...
• B and W Gooseneck Hitch Recommendation for a 2004 Dodge Ram 3500
  The bracket kit part # BWGNRM1313 that you referenced actually requires the center section # BWGNRC900 and not the # BWGNRC800. Because there aren't any sections of your hitch that will fit your 2004 Dodge Ram 3500 your best option is going to be to go with the # BWGNRK1313-5W for the vehicle.
  view full answer...
• B&W Gooseneck Hitch For 1998 Chevrolet C/K 3500 Extended Cab Dually 8 Foot Bed
  The appropriate kit for your 1998 Chevrolet C/K 3500 Extended Cab Dually with the 8 Foot bed is going to be the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit Item # BWGNRK1000. The recommended kit is a combination of the Turnoverball # BWGNRC800, which is what you actually need, and the installation kit # BWGNRM1000 I have added a review video below showcasing some of the features this hitch offers.
  view full answer...
• Can B&W Turnoverball Gooseneck be Transferred From 2008 to 2015 Ford F-250
  You can absolutely transfer the Center Section for B&W Turnoverball Underbed Gooseneck Hitch # BWGNRC800 from your 2008 Ford F-250 to your 2015 Ford F-250, and you'll just need the new installation kit, which is the rail kit and hardware. The correct part for this is the following: - B&W Turnoverball Gooseneck Custom Installation Kit for Ford # BWGNRM1108 The # BWGNRM1108 has everything you need to install the center section in your 2015 F-250, and everything will indeed work just fine.
  view full answer...
• B&W Turnoverball Gooseneck Mounting Bracket for 2006 Ford Truck
  The B&W # BWGNRC800 is the center section you have on a 2016 Ford F-250 or F-350. If you have a F-150 then the Turnoverball # BW77FR then the center section is # BWGNRC900. The 2006 Ford F-150 will not use either of these center boxes so you would need the entire assembly which is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1104. If you have the 2016 Ford F-250 or F-350, then the center section will be the same and the mounting...
  view full answer...
• Replacement Center Section Recommendation for a B and W Turnover Ball Gooseneck Hitch
  If you have a B and W Turnover ball gooseneck hitch in your 1999 Ford F350 like part # BWGNRK1108 the correct center section would be the part # BWGNRC800 that you referenced. You might be able to hit the stuck ball in your hitch with a liberal application of lubricant several times to see if you can free it up. Applying the lube to the lower side of the ball underneath the truck ball would be recommended as well.
  view full answer...

Do you have a question about this Accessories and Part?